Vibe Inc

This article applies to the Original Vibe Board 55″.

For customers with wireless screencasting issues, including:

Inability to screencast through the network

- Inability to screencast through the network
- Unstable wireless screencast 

Dual Wi-Fi will set up a hotspot for you to screencast wirelessly, which is more stable and a smoother experience. 

Please confirm your Model on the back label of your Vibe board:

For model V55N203W, we use a Type B cable port.

For model V55N201W or V55N201R, we use a micro USB port.

- For model V55N203W, we use a Type B cable port.
- For model V55N201W or V55N201R, we use a micro USB port.

Click the icon at the bottom-right of the screen to bring up the Settings side panel. Select Vibe Cast.

Select Cast Hotspot in the menu after enabling Vibe Cast.

Enable Cast Hotspot. You can also name your hotspot, manage security and band and see the number of connected devices here.

You can find the Wi-Fi name provided by the Vibe Board on the device that you want to cast. Make sure your device has connected to the Vibe hotspot before screencasting.

1. Click the icon at the bottom-right of the screen to bring up the Settings side panel. Select Vibe Cast.

2. Select Cast Hotspot in the menu after enabling Vibe Cast.

3. Enable Cast Hotspot. You can also name your hotspot, manage security and band and see the number of connected devices here.

4. You can find the Wi-Fi name provided by the Vibe Board on the device that you want to cast. Make sure your device has connected to the Vibe hotspot before screencasting.

💡 Note: To ensure the performance of the screencast, a maximum of 5 devices is supported. If you cannot connect, please first disconnect an existing device, then try again.

Here are the step-by-step instructions:

Purchase one of these recommended dongles from Amazon or your preferred retailer.

Make sure the system version is above Vibe Scandium(2.6.6). If the system version is too low, please upgrade the system first.

Plug the dongle into the USB port of the Vibe, USB 2 or 3 both work.

1. Make sure the system version is above Vibe Scandium(2.6.6). If the system version is too low, please upgrade the system first.
2. Plug the dongle into the USB port of the Vibe, USB 2 or 3 both work.
 

3. Click the icon at the bottom-right of the screen to bring up the Settings side panel. Select Vibe Cast.

4. Select Cast Hotspot in the menu after enabling Vibe Cast.

5. Enable Cast Hotspot. You can also name your hotspot, manage security and band and see the number of connected devices here.

6. You can find the Wi-Fi name provided by the Vibe Board on the device that you want to cast. Make sure your device has connected to the Vibe hotspot before screencasting.

💡 Note: To ensure the performance of the screencast, a maximum of 5 devices is supported. If you cannot connect, please first disconnect an existing device, then try again.

___________________________________________________________

Send an email to our <a href="mailto:support@vibe.us" target="_blank" rel="nofollow noopener noreferrer">Support Team</a> or <a href="https://knowledge.vibe.us/kb-tickets/new" target="_blank" rel="nofollow noopener noreferrer">Submit a Support Ticket</a>.

If you're having network difficulty screencasting on the Vibe board, using Dual Wi-Fi/HotSpot could be a solution.

Style	Model	Chip	Advantage	Price	Notice
+	Edimax EW-7822UAC	RTL8812AU	Better performance	$28.49 (Only one WiFi dongle price)	The dongle cannot be plugged directly into the Vibe due to length, an additional USB hub is required
	NETGEAR A6100-10000S	RTL8811AU	Compact and can be directly plugged into the Vibe	$37.00

For customers with wireless screencasting issues, including:

Please confirm your Model on the back label of your Vibe board:

For model V55N203W:

Here are the step-by-step instructions:

For models V55N201W and V55N201R

Here are the step-by-step instructions:

💡 Tip